Wednesday, November 9, 2016

Extending the Lifetime of your Exhaust System

Three main things you can do to maximize the life of your Atmos exhaust system and optimize suction.
There are only three things that you need to pay attention to in order to take optimal care of your exhaust system:
  1. Check the filter mat
  1. Monitor filter saturation
  1. Use a prefilter mat
Checking the filter mat
You should check the filter mat once a month and replace it if necessary. The filter mat is located at the bottom of both the Atmos Mono and the Atmos Duo. In the Atmos Compact, you will find the filter mat on the right side of the device.
IMPORTANT: Before opening the exhaust system, make sure you turn it off and disconnect it from the laser!

Filter saturation

Display Atmos exhaust system+

The display of your Atmos exhaust system shows the value “Filter," indicating filter saturation (how “full” the filter is). When the value is 100%, the filter must be replaced.
At 10% filter saturation you have the same suction as at 90%. The system automatically regulates this. Nevertheless, the filter must be replaced once it is full.

Use a prefilter mat
A prefilter mat can greatly extend the service life of the Atmos Comfort Box. Once the mat is inserted into the upper frame, it filters out coarse dust and dirt particles and only the fine dust enters the Atmos Comfort Box.

Be sure to also check the prefilter mat regularly and replace it whenever necessary.

Visit for more information

No comments:

Post a Comment