|
Photo 1:
Engraving 100% done, cutting 100% done, total time 1:01:45 |
Where do we as engravers meet production
bottlenecks in our daily engraver’s life? Sometimes speed matters and others it’s
services, we can’t offer. Often orders are too big to be handled, or the
quantities are too high to be processed in the given time, because production
capacities and capabilities are limited. With volumes becoming higher and tight
deadlines being a daily business requirement, the challenges in the engraving
business have changed enormously in the last decades.
And the business keeps changing. The
market and the customer demand flexibility from suppliers; meanwhile, the
engraver has to keep an eye on the profitability of his/her business. Being
successful requires meeting the needs of customers and being profitable at the
same time. Having high laser power of your laser system helps you to break the
limitations you might meet now.
The Impact of More Laser
Power
|
Photo 2:
Engraving 40% done, no cutting, total time 1:01:45 |
Many in the laser market have been told
that a laser system with 25-30 watts is sufficient for all engraving jobs. In
some cases, the decision is based on budget or the laser user believes that his
application—for example with sensitive materials—can only be produced with a
low-wattage machine. This assumption is very common and widespread. What is not
that prevalent is that high laser power has clear advantages and strong
benefits. Higher power means more profitability for the engraver.
Generally, you can say that more laser
power means more productivity and more flexibility for almost all laser
engraving and cutting applications. In laser theory, engraving and cutting
speed increases linearly to increasing laser power. That’s true for non-heat
conductive materials like rubber, wood, stone, ceramic, tiles, glass and any
plastics—which means acrylics or laserable plastics. In these cases, more laser
power enables the laser user to process his/her materials faster.
What Does This Mean for
My Application?
|
Photo 3: Comparison of cut letters
Left 80-watt system & Right 30-watt system |
In practice: Comparing a 30-watt system
with an 80-watt system, the results are quite impressive. With an 80-watt system,
an A4 rubber sheet with 48 rubber stamps on it is engraved and cut in 1:01:45
(See Photo 1); in this time a 30-watt system completes only 40% of the
engraving area (See Photo 2). It would take the 30-watt system 2:15:06 to
finish the engraving and cutting of the whole A4 sheet. In the time saved, you
can work on the next jobs and be much more productive.
On acrylics, the benefit of high laser
power is very obvious. A rule of thumb says 10 watts provides the ability to
cut 0.04 inch thick acrylic. E.g. 30 watts would give perfect cut quality and
good productivity on a 1/8 inch sheet of acrylic. If you increase the laser
power to 80 watts, you can process 5/16 inch perfectly in the same time as 1/8
inch with 30 watts. In addition, you can process the 1/8 inch more than two
times faster with the high-power system.
Now let’s take a sample application:
Acrylic dimensional lettering with flame-polished edges; a sheet of acrylic, 36x24
inch, 5/16 inch thick, fully nested with 64 pieces of 4 inch tall letters. On a
30-watt system, this job would take 4:18:00; the 80-watt system will cut it in
1:47:00 (See Photo 3).
|
Photo 4:
Laser engraved and cut paper with an 80-watt system |
Those were two good examples of “laser
power hungry” applications. But high laser power also counts when it comes to
engraving and cutting low-power applications like engravable plastics,
engraving heat-conductive materials like anodized aluminum, or marking
stainless steel with Thermark. Increasing laser power means increasing
productivity.
Now, the assumption might be that
sensitive materials can’t be processed with high laser power and that
applications like engraving FlexiBrass or paper are restricted to low laser
power. But that is not the case. Photo 4 and Photo 5 show two sensitive
applications, both processed with an 80-watt system. The engraving quality is
spotless, and the high laser power does not show any negative effects.
Secure Your Competitive
Position
|
Photo 5: Perfect Quality on FlexiBrass |
Major clients and key accounts demand
more than one application from their engraver’s shop. They need various laser-engraving
services and personalized gifts, and they need variable quantities: from single
pieces to large numbers. Serve as a full-service provider and deliver high
volumes in a short period of time. With a certain level of laser power, at
least 80 watts, you will have this flexibility and be prepared as a laser user
for the needs of the future. Moreover, our experience shows that most Trotec
customers who buy a second laser system decide to increase the power level for
the second order. The trend is to go for more laser power.
Learn more at www.troteclaser.com
|
Christine Boegl and Alex Jauker |
Alexander
Jauker has been with Trotec for five years and is responsible for product
management of Trotec’s flatbed line. His focus is on seeking new trends and
market insights in order to be able to provide the best flatbed laser systems
in the industry.
Auther: Alexander Jauker
Editor: Christine Boegl